Liquid management alarms

universal tank alarm

Ideal for new build sites or where mains supply is readily and easily available making installation efficient and cost effective.

The unit continuously checks for the presence of oil at the probe by measuring conductivity.

The probe is normally submersed in water and the LED on the unit will be green.

When there is a sufficient build-up of oil at the surface that covers the conductivity probe, a sounder inside the unit sounds intermittently and the LED on the unit turns red.

The LED will remain red until the probe detects water once again.

cesspool alarm

A Cesspool alarm is installed within a holding tank to monitor the level within the tank. Ideal for installation in cesspits to provide an audible notification when levels reach predetermined levels.

A cesspool contains excess sewage gases so you should not check the levels by lifting the lid. Alarm warnings allow you to ensure the safe and economic operation of cesspits preventing harmful overflow from polluting watercourses, which may result in expensive fines and clean up costs.

This unit has an audible alarm and a liquid crystal display and is operated by means of a simple Push Switch.

An output relay is provided which allows the use of an external sounder or beacon and can also be connected to your building management system (BMS).

high level alarm

Ideal for new build sites or where mains supply is readily and easily available making installation efficient and cost effective.

Alarm warnings allow you time to take corrective action ensuring the safe and economic operation of tanks preventing overflow and pollution of watercourses which may result in expensive fines and clean up costs.

This unit has an audible alarm and a liquid crystal display and is operated by means of a simple Push Switch.

An output relay is provided which allows the use of an external sounder or beacon and can also be connected to your building management system (BMS).

washdown tank alarm

The Darcy Washdown Tank Alarm is used to monitor silt and liquid levels in underwater washdown areas.

The unit allows the user to set a high level probe at a pre-determined level to ensure that the washdown area does not overflow in the event of a heavy rainfall or usage.

With the GSM capability, in the event of a high level event, the site is protected 24/7 and reduces the risk of a pollution incident, whilst reducing waste management costs.